USB C PD Trigger Module DC-DC QC Trigger Power Bank Module Breakout Delivery Board Fast Charger Board Spoof Scam Fast Charge

1. Support 5V 9V 12V 15V 20V fixed voltage output
2. Support to induce 5V, 9V, 12V, 15V, 20V voltage
3. Fast charging support protocol: PD2.0/PD3.0, QC2.0/QC3.0, AFC
4. Support voltage: 5V, 9V, 12V, 15V, 20V (voltage step is not supported)
5. Voltage adjustment method: According to the table on the back of the board, adjust the DIP switch to control the voltage output
6. Size: 3.1*2*cm
7. Net weight: 2.9g

Notice:
1. After adjusting the DIP switch, because there is no voltage indicator, it is recommended to use a multimeter to measure the voltage before connecting to the application circuit.
2. If the DIP switch is not adjusted according to the table, the module will output any one of the above voltages.

Notice:
1. After adjusting the DIP switch, because there is no voltage indicator, it is recommended to use a multimeter to measure the voltage before connecting to the application circuit.
2. If the DIP switch is not adjusted according to the table, the module will output any one of the above voltages.